WASTEWATER TREATMENT
Biocycle version by Tricel
OVERVIEW
What is it?
The Biocycle septic system aerobic wastewater treatment system is a self-contained sewage and water treatment solution designed for areas without a centralised sewerage system access. This system utilises natural biological processes to efficiently purify all incoming wastewater discharged through garden irrigation.
A residential Biocycle system typically consists of a single tank, approximately 2.5 metres deep and wide. The tank is internally divided into compartments of varying sizes, each serving a specific function in the treatment process.
Wastewater and effluent from the household enter the Biocycle tank through a single inlet point, facilitated by gravity flow. The water then progresses through the system’s chambers via displacement. As untreated water enters one chamber, treated water flows out through an outlet into the subsequent chamber, where the water level is slightly lower.
By employing this sequential displacement method, the Biocycle septic system ensures the progressive treatment of wastewater, allowing for the efficient removal of contaminants and producing purified water ready for irrigation purposes.
How does it work?
The Tricel biocycle septic system alternative, also known as the Tricel Novo, operates through a three-step process to effectively treat wastewater:
Stage 1: Primary Settlement Chamber
In the initial stage of the wastewater treatment process, the Tricel system separates the grease and solid particles from the water. Grease accumulates on the surface, while heavier solids settle at the bottom of the tank.
Stage 2: Aeration Chamber
The second compartment of the Tricel Biocycle version involves aerobic breakdown. Specially designed filter media provide a habitat for naturally occurring bacteria. These aerobic bacteria play a crucial role in digesting and breaking down pollutants present in wastewater. To sustain these bacteria, a dedicated compressor located in the top section of the system continuously supplies air to the chamber.
Stage 3: Final Settlement Chamber
During the third stage of wastewater treatment, the liquid containing suspended sludge and bacteria flows into the settlement chamber. The suspended sludge settles within this chamber at the bottom while the treated liquid remains above. A continuous sludge return system then sucks the settled sludge back to the primary settlement chamber for further treatment. The treated liquid that remains in the settlement chamber meets the required standards and can be safely discharged from the Tricel system.
Installing a Tricel sewage treatment plant
Things to check when installing a sewage treatment plant:
To ensure that your Tricel system is ready for use, please follow these steps:
Installation and Water Filling
- Make sure that the system is correctly installed in the designated location.
- Fill each compartment of the system with water gradually, except for the Pumpout Chamber, which should be left empty.
Proper Connection to Household Drainage
- Ensure that your household drainage system is correctly connected to the system inlet. This will enable the flow of wastewater into the sewage treatment system.
Electricity and Alarm Panel
- Connect the system to a reliable electricity source.
- Install the alarm panel to provide meaningful notifications and alerts regarding the system’s operation.
Full Commissioning of the System
- Ensure all essential components are installed and connected, including the water pump, air blower, and percolation system.
- If you have any concerns about the installation and connection process, don’t hesitate to contact us !
Preparation of the Percolation Area
- Prepare the designated irrigation area by ensuring suitable landscaping.
- It is essential to have some form of vegetation or ground cover in place, as irrigating barren dirt is not recommended.
- Additionally, check if your local Council has any specific requirements or regulations related to landscaping and irrigation.
Following these guidelines ensures that your Biocycle by Tricel system is ready for optimal functionality and efficient wastewater management.
The solution Tricel Provides : Tricel NOVO
Looking for an advanced Wastewater Treatment Plant? Tricel Novo is the best solution for your project, with extended warranties on the tank and on the internal parts.
Features
The SMC tank is produced through a compression moulding process that involves high heat and pressure. This manufacturing method results in components that surpass the strength and durability of standard GRP or PE tanks.
In the wastewater treatment industry, SMC stands out as a unique material. Tricel SMC tanks, incorporating this innovation, have demonstrated exceptional performance for over 50 years, even in the most challenging climatic conditions, without any defects.
Tricel’s ceramic diffuser sets a new standard in the domestic wastewater treatment plant market. It outperforms the rubber equivalents offered by other competitors, boasting a lifespan twice as long.
Furthermore, Tricel’s system eliminates the need for concrete backfill during installation on most sites. This feature not only simplifies the installation process but also provides cost savings of up to €400.
Interact with the Tricel Novo IE6 Treatment Plant
How to interact with the tank
- Click on the numbers to see the annotations.
- You can also switch between the treatment process stages (yellow circle at the bottom left-hand corner) and the anatomy of the Novo (green circle at the bottom left-hand corner).
- To view in Virtual Reality (VR), click the square at the top right-hand corner and simply scan the QR code with your phone.
- In order to check the dimensions, click on the spanner icon.
- To download an image of the Novo, click on the camera icon (top right-hand corner)
How to maintain your sewage treatment ?
Here are some key steps to follow for proper maintenance:
Regular Inspections
Conduct routine inspections of the system to check for any signs of damage, leaks, or blockages. Pay attention to the tank, pipes, pumps, and electrical components. If you notice any issues, address them promptly.
Maintenance of Components
Maintain and service the components of the Biocycle septic system as recommended by the manufacturer. This may include servicing the water pump, air blower, irrigation system, and alarm panel. Follow the manufacturer’s guidelines for cleaning and maintenance tasks.
Water Quality
Monitor the quality of the treated water leaving the system. Conduct periodic tests to ensure that it meets the required standards for safe disposal or irrigation. If the water quality is not satisfactory, contact a professional for troubleshooting and adjustments.
Landscaping and percolation area
Maintain the landscaping in the percolation area. Trim plants, remove weeds, and ensure proper coverage to enhance the efficiency of the irrigation process. Follow any local Council requirements regarding landscaping and irrigation practices.
Avoid Chemicals and Harmful Substances
Refrain from introducing chemicals, harsh cleaners, or other harmful substances into the wastewater system. These can disrupt the natural biological processes and hinder the system’s performance.
Professional Servicing
Schedule periodic professional servicing and inspections of the Biocycle septic system. Experts can assess its condition, perform maintenance tasks, and address any underlying issues.
Our range of products
Tricel Vento Septic Tank
Shallow dig tank, strong & robust underground tank, No electrical or moving parts. Ideal for sites with good drainage & plenty of space.
Tricel Novo Sewage Treatment Plant
Durable & long lasting SMC tank, shallow dig tank, easy installation (Plug and Play), long life components.
Tricel Maxus Sewage Treatment Plant
Commercial plant. Submerged Aerated Filter (SAF) technology. Ideal for project over 50 PE.
Tricel Tero Tertiary Treatment
An eco-friendly and modular system with proven E.Coli Treatment capabilities in line with the new EPA requirements.
Tricel Puraflo Secondary treatment plant
Ideal for sensitive sites, compliant to Irish Standard, small footprint.
Tricel Sandcel
Sand Polishing Filter
Provides a dual function of polishing the effluent from a wastewater treatment system and disposing it into groundwater.
Tricel Pumping Stations
Pump fluids from one place to another where gravity drainage cannot be used, easy and trouble-free installation
Key features
RELIABLE & LONG LASTING
FAST DELIVERY
Manufactured in Ireland, short lead time
Certified
CE certification EN12566- 3, EN12566-1 and S.R.66
Articles you might be interested in
Quality
WHY CHOOSE US
Because Tricel manufactures and chooses the best materials for the design of its products. Most Tricel products have warranties of up to 10 years guarantee. All our products within this product range is CE certified to EU safety, health and environmental requirements.
Please find below the list of our products and the warranty that is applied. Note that this warranty is only valid if the sewage system is properly installed by a qualified installer. Please also know that all warranties are subject to correct use of the product, including maintenance as per manufacturer guidelines.
50 YEARS IN BUSINESS
A highly successful multinational corporation with over 50 years’ valuable industry experience
SEWAGE TREATMENT PLANTS
Plants available for all capacities, from 1PE up to 50PE. Free advice on request.
Fast Delivery
On-time delivery is a core requirement of our successful business operations
Recent projects with Tricel Novo IE6 treatment plant
Extensive industry experience, manufacturing since 1973.
Tricel manufacture deliver & install sewage treatment plants across a wide range of industry sectors throughout Ireland & the UK. Tricel also provide import/export services for our international clients. Top quality material offers outstanding capabilities including long life, durability and is a cost-effective solution for sewage treatment even in the harshest environments.
Tricel has installed many of its Tricel Novo Sewage Treatment Plants across the UK.
Frequently Asked Questions
WHAT IS PE ?
PE represents the initials of Population Equivalent. Population equivalent: conversion value which aims at expressing non-domestic applications in terms of domestic loading based on 1 person creates 60 g/day BOD5 and 150l/day. (Code of Practice: Wastewater Treatment and Disposal Systems Serving Single Houses (p.e. < 10), EPA)
DIFFERENT PRODUCTS SOLD BY TRICEL
Tricel Novo & Vitae
Both are wastewater treament plant solutions manufactured by Tricel. Wastewater treatment plants offer a superior quality of treatment. For example, the Tricel Novo comprises of three independent wastewater treatment zones and offers an average of efficiency of 95.9% BOD removal.
This is a higher treatment standard than the effluent from a septic tank. Please note: all wastewater treatment plants used in Ireland must comply with the EN12566-3 standard and all septic tanks must comply with the EN12566-1 standard..
Tricel Vento
The septic tank from Tricel is manufactured as a primary treatment. Designed for the settlement of your effluent. This product may need an additional treatment like the Sandcel or Puraflo.
WARRANTIES
Most Tricel products have a warranty. To discover all the guarantees on our products, as well as on the internal parts, consult our dedicated product pages.
WHAT IS THE QUALITY OF THE WASTEWATER PRODUCED?
The required standards are 20:30:20 BOD, SS, NH4. All Tricel produces exceed the requirements when tested to En12566-3 and comply with SR66.
Learn more about our certification
MAINTENANCE ON THE WASTEWATER TREATMENT SYSTEMS
Tricel recommends that you maintain your device to the fullest. You are obliged by law to avoid all types of pollution or nuisances. Do not hesitate to contact us for more information on our service contracts. An annual maintenance contract may be offered.
Get in touch
Error: Contact form not found.