SEWAGE TREATMENT SYSTEM

Sewage treatment system : Tricel novo IE 6

Home » Wastewater Treatment » Sewage treatment system

August 11, 2025

This sewage treatment system is suitable for a 4-bedroom home. The Novo is reliable, easy to install, and simple to maintain for all of your wastewater treatment needs.

Stage 1: The wastewater travels to the primary settlement chamber.

Here, the heavier solids drop to the bottom of the chamber, separating from the liquids. The lighter solids float to the top and harden, creating a seal to prevent any odour from escaping. 70% of solids are separated in the stage.

Stage 2: aeration chamber.

Naturally occurring bacteria inhabiting specially designed plastic filter media break down the waste, removing it from the liquid. Wastewater passes through the filter media over and over again, purifying the wastewater.

Stage 3: The wastewater flows to the final settlement chamber.

Any remaining bacterial particles separate from the liquid. Any final impurities fall to the bottom of the system and are then pumped back to the primary settlement system. At the end, the remaining liquid now meets the required standards and is ready for discharge to a suitably designed discharge area.

064 6632421

If you have any questions, feel free to call us

VISIT OUR virtual SHOWROOM

Features and Benefits of Tricel Novo 6+ Sewage Treatment Plant

The Tricel Novo sewage treatment system requires less than 5m squared ground clearance.
It is a compression moulded SMC (sheet moulding compound) tank. The compression moulding process is one of the most technologically developed processes to produce structural composites. They are much stronger than GRP or Polyethylene tanks.
No concrete backfill for installation on most sites saving up to €400 over lower quality GRP/plastic competitors.

Tricel Novo IE 6+ Specifications

Dimensions – Length 2.6m x Width 1.64m x Height 2.24m
Weight while empty – 300kg
Inlet invert to base – 1.375m
Outlet invert to base – 1.3m
Inlet invert to ground level – 0.535m

If you want more information about our sewage treatment system and services. Don’t hesitate to check our brochures below, or to contact us directly

Interact with the Tricel Novo Sewage Treatment Plant

How to interact with the tank

Click on the numbers to see the annotations.
You can also switch between the treatment process stages (yellow circle at the bottom left-hand corner) and the anatomy of the Novo (green circle at the bottom left-hand corner).
To view in Virtual Reality (VR), click the square at the top right-hand corner and simply scan the QR code with your phone.
In order to check the dimensions, click on the spanner icon.
To download an image of the Novo, click on the camera icon (top right-hand corner)

7 Key Reasons to Choose a Tricel Novo Ie6

There are many key reasons to choose a Tricel Novo wastewater treatment plant. Please find below some of them.

Highly durable SMC tank

A Tricel Novo is constructed from a compression moulded SMC tank. Compression moulding is one of the most technologically developed processes for manufacturing structural composites. Components are manufactured under heat and high pressure and have unrivalled strength and durability over standard GRP or polyethene tanks.
SMC is unique in the wastewater treatment industry. Tricel SMC tanks have operated in some of the harshest climatic conditions for over 50 years with no defects.

Environmental agency compliance

Tricel Novo complies with the Environment Agency General Binding Rules in England, Natural Resources Wales exemption criteria and SEPA requirements in Scotland. Tricel advises consulting with your local agency on the effluent treatment required.

Fully tested and certified

All Tricel wastewater treatment plants have been tested for European certification EN 12566-3. This certification pushes all plants for strength, water tightness, durability and treatment efficiency.
By using a wastewater treatment plant which is CE certified. You can rest assured that it has complied with tests and inspections, guaranteeing an elevated level of security and efficiency.

Minimum maintenance and repair costs

No moving parts or pumps in the plant, ensuring reliable operation. Minimal maintenance and repair costs.

Lower installation costs

No concrete backfills are required for installation on most sites saving up to £300 over lower quality GRP or polyethene alternatives from competitors.

Fitted alarm

There is a factory alarm fitted onto all Tricel Novo systems. This system will warn you if something needs to be done on the Tricel Novo.

Ceramic diffuser

Tricel’s ceramic diffuser is unique in the domestic wastewater treatment plant market. It will last twice as long as the standard competitors’ rubber equivalents. This saves money on both call-out fees and replacement parts.